[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: SatPC32 Question


A couple of areas to look at.  First, take a look at the CAT menu, and see
what your update frequency interval is.  I use 20 Hz for SSB.  That gives a
smooth tracking, and once netted, SATPC32 will track through a full pass.
It WILL update every few seconds, but the jump should be small enough that
it is just barely audible.  You can get by with a much larger step size, but
of course the jump will be more noticeable, but still usable.  

Are you using a USB serial port, or a "real" port?  There is nothing wrong
with a USB serial port per se, but some of them are rather flakey.  I had
one which required about 5 times the recommended CAT delay to work at all,
and would usually eventually cause the radio to lose tracking exactly as you
describe.  The was not a problem with SATPC32!!  Nothing else worked
reliably with that port either, so I finally gave up on it and went back to
a real serial port, since I had one to spare.


Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb