[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: rotor interface options

The FOD-Track PC board is available from FAR Circuits ( 
www.farcircuits.net ), and will cost about $30 in parts to build.  Mark 
Spencer from the ARRL also recently put together the Sat688, a PIC-based 
controller which was featured in the AMSAT Journal, available in limited 
quantities.  A nice feature was that it could be built for RS-232, USB, or 
both.  You might try dropping him a line at mspencer@arrl.org to see if any 
are still available.  FOD-Track is directly supported by SatPC32, Ham Radio 
Deluxe, Nova, and most other tracking programs.  The Sat688 is supported in 
Nova by the EasyComm 1 setting, and in SatPC32 as a SAEBRTrack Box.  It will 
probably work with other programs that offer one of those choices.

I have used the FOD-Track for a couple of years now and am very happy with 
it.  I also picked up one of the Sat688 boards and am just finishing 
assembly of it.  (I'm still holding onto my club's KCT... they don't want to 
let it go yet)

Lastly, there are also the LVB-Tracker from Howard Long, G6LVB www.g6lvb.com 
and the W0LMD Tracker www.ultimatecharger.com , although I don't really know 
much about them.

George, KA3HSW

----- Original Message ----- 
From: "Larry" <n1miw@cox.net>
To: "Amsat Mailing List (E-mail)" <amsat-bb@amsat.org>
Sent: Sunday, January 07, 2007 8:03 PM
Subject: [amsat-bb] rotor interface options

>     Good day and happy New Year to all! I was just wondering what options
> are available to connect an az-el rotor controller to the PC. The Kansas
> City Tracker isn't in production, as well as the Trackbox, except on the
> used market. What else can we use?    73's... Larry N1MIW

Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb