[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

9600bd KO-25 with AGWPE

I copied 9600bps signals from UO-22 using only soundcard, not TNC,
with "MixW2" program at 25 Mar.

And I copied 9600bps signals from KO-25 using only soundcard, not TNC,
with "AGWPE" and "AGWMONITOR" programs at today, 29 Mar.

>  1:Fm HL02 To QST <UI pid=F0 [DAMA] [EAX25] Len=39 >[09:56:40]
> EIS:<3ca3bbb7> [s1] Timer:0 TxEnable:1
>  1:Fm HL02-11 To PBLIST <UI pid=F0 [DAMA] [EAX25] Len=11 >[09:56:43]
> PB: Empty.
>  1:Fm HL02-12 To BBSTAT <UI pid=F0 [DAMA] [EAX25] Len=11 >[09:56:44]
> Open 12a : 

Set up as follows in "AGWPE" program for 9600baud.

 (a) Run "AGW Packet Engine.exe"
     Left click AGWPE icon on the bottom bar of WindowsXP
      - Properties - New Port
                      - Select Port (LPT3:)
                        SirialPort/modem BuadRate (19200)
                        TNC Type (SoundCard)
                          - Left  Channel - Check 9600b (G3RUH)
                          - Right Channel - Check 9600b (G3RUH)
                        TNC RadioPort - Port1 (436.500MHz 9600baud)

 (b) Run "Agwmonitor.exe"
     File - Properties - Enter your Callsign

"AGWPE" program is available at,


   AGWPE.ZIP ........ AGW Packet Engine
   AGWMONITOR.ZIP ... AGW Packet Monitor

See for more information about "AGWPE" program,


Name : Mineo Wakita / JE9PEL, JAMSAT member
Mail : ei7m-wkt@asahi-net.or.jp
URL  : http://www.ne.jp/asahi/hamradio/je9pel/
QTH  : Yokohama Japan, GL:PM95TJ
Date : Mar 29, 2002
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org