[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: SWR on a receive-only antenna

Hello Gunther.  The VSWR on a t-line is set by the load, not the source.  So 
for the case of a receiver, the antenna is the source and the receiver input 
impedance is the load.  If the receiver input Z is the same as the Zo of the 
RG6, then the VSWR is 1:1
73- Rick, KY0Q
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org