[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Suggestions for a new antenna driver



I have used Uni_Trac with great success for the past 3-4 years. Dave is a
great guy to work with and the setup of this unit is not difficult. It works
off your parallel port.

I recently purchased the ARS unit from EA4TX, which also works off the
parallel port. Priced right at ~$150 for the Azimuth and Elevation control
boards, assembled. I plan to use this on the summer project - converting my
10' TVRO dish to AZ/EL operation. The only thing lacking in that project is
the ability to weld correctly. And I thought I could do anything....

----- Original Message -----
From: William P Gravett <wgravett@juno.com>
To: <amsat-bb@AMSAT.Org>
Sent: Friday, February 22, 2002 2:27 AM
Subject: [amsat-bb] Suggestions for a new antenna driver


> Well, guys, hate to say it but I think i better get rid of my
> KCTracker/Tuner board since I am afraid the days of ISA bus stuff are
> limited.
> Any suggestions /recommendations for an antenna interface /driver????. I
> am using a G5500 az-el rotor system and I have Wisp and Nova and Station
> although I have not configured Station yet.
>
> Thanks for your help.
>
>
> Bill, W5PGZ
> ________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today!  For your FREE software, visit:
> http://dl.www.juno.com/get/web/.
> ----
> Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home