[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: ICOM AutoTune AO-40 question - PT II



Date: Tue, 12 Feb 2002 23:21:08 +0000
To: <kd9kc@elp.rr.com>, amsat-bb@amsat.org
From: John <aa1ye@amsat.org>
Subject: Re: ICOM AutoTune AO-40 question - PT II

        KD9KC de AA1YE

At 12:51 2/12/02 -0000, you wrote:

>OK...  next question.  Does anyone have the hex value

>command strings to do up/down freq control to the ICOM

>radios.  

>I believe that FEFE42E005 is correct as a starting

>point, but I find no command for up or down.

                ..........................

>If I get this working, I can let it collect data while I am

>at work.  If not, Doppler will take it out in minutes.

	........................................................
        Mike,


        Have you considered using ZL2AMD's Uni-Trac 2000? 

Uni-Trac 2000 will automatically tune your ICOM radio to follow the Doppler
frequency changes.      

Uni-Trac 2000 will also steer your antennas via the Yaesu (or other)
antenna steering control box.

Uni-Trac 2000 also provides 2 independant programmable lines for
switching (polarisation?) relays etc.

Uni-Trac 2000 needs only one parallel port (LPT-1 or LPT-2) to do all of this.

Uni-Trac 2000 is 100% compatible with NOVA, Wisp and other tracking programs.

Uni-Trac 2000 is available from Spectrum International in Concord, Mass.
See Spectrum's ad in <italic>The AMSAT Journal.</italic>       

	John   AA1YE,     AMSAT 439
	

----
Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org



AMSAT Top AMSAT Home