[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Yaesu FT-726R Problem

I have a peculiar problem on my FT-726R
On Switch-on it takes about 5 minutes for the s meter to come up to full strength (on the local repeater with a known signal on the air), this includes the audio.
It does not matter what band or mode is being used. When switching from one band to the next the same problem occurs except the rise time of the s-meter is a little faster once the set is warmed up. All voltages check out ok.

Any clues as to what the problem may be would be greatly apreciated.
e-mail dlong@nu.ac.za

Many thanks

David   ZS5FR

Manager: Technical Affairs
School of Electrical & Electronic Eng.
University of Natal
South Africa

Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org