[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Fw: Parabolic AB

> Received my bias tee and downconverter today.
> There was no paper work with the downconverter at all.  It isn't too hard
> figure out, the antenna terminal is marked.
> The bias tee has a small red dot on it indicating which end goes to the
> downconverter.  A schematic is included, and with an ohmmeter, one can
> verify which side goes to the downconverter and which side goes to the
> receiver.  The receiver input will not appreciate 12VDC, so be CAREFUL.  I
> will try it as soon as time permits.
>  I also purchased the Phillips SPG 36 antenna, which I will use with the
> Parabolic downconverter.
> I'll let you know how it works.

Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org