[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Step

On Wed, 17 Jan 2001 03383041552@tim.it wrote:

> Hi to the list,
> i own a Kenwood TM-741E which i have modified to RX and TX 
> at 9600 baud.I would like to use it even to track the satellites but i have a problem.How every1 knows the minimum
> step is 5 Khz. For the doppler correction i need less then 5 Khz.Does any1 knows if exsist any modification to drop down the minimum step lower then 5 Khz?

My experience has been that I can decode packets OK using the 5 Khz steps.


Via the amsat-bb mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org